Front Suspension
FRONT ARB POLY BUSH : TVR PART NO. C0030U
A high quality polyurethane upgrade 22mm bush for front anti rollbar.Fits Griffith and Chimaera. VERY COMPETITIVELY PRICED PER PAIR. PLEASE CHECK DIMENSION OF YOUR BUSH BEFORE ORDERING.
Price: £17.25
ex VAT £15.00
COMPLETE WISHBONE SET GRIFFITH/CHIMAERA : PART NO. TVR099
A complete set of all wishbones for the Griffith or Chimaera (1 x C0070, 1 x C0077, 1 x C0152, 1 x C0153, 1 x D0061, 1 x D0062 and 2 x D0072). If you are doing a complete rebuild or have stiffened your suspension it is important that all wishbones are replaced to ensure maximum strength. THIS IS A VERY SPECIAL OFFER AND WILL NOT LAST FOR LONG. BUY NOW AT THIS VERY SPECIAL PRICE PRICE AND SAVE £190 OVER BUYING INDIVIDUAL PARTS.
Price: £782.00
ex VAT £680.00
WISHBONE FRONT UPPER LH :TVR PART NO. C0153
Front upper wishbone, left hand for Griffith and Chimaera.These are high quality replacements sand blasted and powder coated to make them last. SEE TVR099 FOR A SPECIAL DEAL FOR A COMPLETE SET FRONT AND REAR
Price: £101.84
ex VAT £88.56
WISHBONE FRONT UPPER RH :TVR PART NO. C0152
Front upperr wishbone, right hand for Griffith and Chimaera.These are high quality replacements sand blasted and powder coated to make them last. SEE TVR099 FOR A SPECIAL DEAL FOR A COMPLETE SET FRONT AND REAR
Price: £101.84
ex VAT £88.56
WISHBONE FRONT LOWER LH :TVR PART NO. C0077
Front lower wishbone,left hand for Griffith and Chimaera.These are high quality replacements sand blasted and powder coated to make them last. SEE TVR099 FOR A SPECIAL DEAL FOR A COMPLETE SET FRONT AND REAR
Price: £179.80
ex VAT £156.35
WISHBONE FRONT LOWER RH :TVR PART NO. C0070
Front lower wishbone, right hand for Griffith and Chimaera.These are high quality replacements sand blasted and powder coated to make them last. SEE TVR099 FOR A SPECIAL DEAL FOR A COMPLETE SET FRONT AND REAR
Price: £179.80
ex VAT £156.35
WHEEL CENTRE BADGE, PART NO G0038B
Badge for wheel centre, Estoril wheels. Still got the wheel centre but the badges are looking tired. Replace them with these badges for a nice fresh look.
Fits: Griffith
Price: £2.30
ex VAT £2.00
LOWER BALL JOINT BOLT KIT, PART NO TVR059
Lower ball joint fitting kit, for Griffith and Chimaera, supplied as three bolts nuts and washers.
Price: £5.18
ex VAT £4.50
SPIDER WHEEL CENTRE AND BADGE, PART NO G0135
Wheel centre and badge to fit all spider wheels.
Fits: Cerbera V8, Tuscan, T350, Tamora, Cerbera SP6, Tuscan2, Sagaris
Price: £15.81
ex VAT £13.75
Please contact us for further information concerning availabilty or suitable application.
STEERING LOCK STOP, PART NO H0756
Steering lock stop, used to stop tyres fouling the suspension when larger wheels are used, normally one used per side, but more can be fitted, priced each.
Fits: Cerbera V8, Tuscan, T350, Tamora, Cerbera SP6, Tuscan2, Sagaris
Price: £6.90
ex VAT £6.00
DRAG LINK BUSH, PART NO C0172
Front suspension drag link bush as used on all cars from Cerbera onwards.
Fits: Cerbera V8, Tuscan, T350, Tamora, Cerbera SP6, Tuscan2, Sagaris
Price: £42.17
ex VAT £36.67
FRONT WHEEL BEARING KIT, PART NO C0004KL
Front wheel bearing kit, left hand, includes two bearings grease seal, grease and hub nut.
Price: £37.95
ex VAT £33.00
FRONT WHEEL BEARING KIT, PART NO C0004KR
Front wheel bearing kit, right hand, includes two bearings grease seal, grease and hub nut.
Price: £37.95
ex VAT £33.00
30-LED WORKLIGHT: PART NO. MS033
This superb worklight is 24cms long and has a 30-LED array to throw light into the darkest corner. It has a hanging hook and is magnetic on the back leaving you with both hands free to work. It uses 6 x AAA 500mAH Ni-MH rechargeable batteries and comes complete with cigarette lighter plug and a mains adaptor. Buy one now and shed some light on things during these dark evenings!
Price: £28.69
ex VAT £24.95
TRACK ROD END, PART NO H0314
Track rod end, for all later cars.
Fits: Cerbera V8, Tuscan, T350, Tamora, Cerbera SP6
Price: £17.25
ex VAT £15.00
DOUBLE ADJUSTABLE S/ABS & SPRING SET, PART NO PT2
PRO-TECH SHOCKS 600 SERIES are made from 52 M/M diameter 6262 specification aluminium with adjustable spring seat platform for 2 ¼" I.D. springs. The 600 SERIES has independent bump and rebound adjustment, this allowed valving changes to be made at all shaft velocities without effecting the other valving adjustments. These shocks will give you the advantage over the competition at which a tyre is loaded or unloaded during dynamic weight transfer. Dynamic weight transfer is the transferring of weight from side to side during cornering, from rear to front during deceleration and from front to rear during acceleration. By changing the stiffness of the shock's independently on the racecar, we are adjusting the loadings on the tyres at different points on the racetrack, if done correctly good handling will result in getting you to the chequered flag first! All units are hand built and come complete with all fittings and springs, allow 10 days delivery. Please specify vehicle details when ordering.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Cerbera SP6
Price: £1069.50
ex VAT £930.00
PROTECH SHOCK ABSORBER/SPRING SET, PART NO PT1
Protech shock absorbers, are a high quality product suitable for fast road use and track days, at an affordable price and come complete with springs, adjustable spring platforms and adjustable damping. The control knob has only 13 click settings with a total movement of 300 degrees (less than one turn). A new internal sealing system is designed to eliminate high pressure bleeding so all movement of oil in bump and rebound is consistently controlled through the piston and base valve. These units are ultra light weight all aluminium design and the components used are C.N.C machined to a very high standard, they are then anodised in clear and black to give maximum protection and presentation. (All units are hand built to order). Please specify details of the car when ordering, allow 10 days delivery, comes complete ready to fit, with 3 years warranty. Suitable for Griffith, Chimaera, Cerbera, Tuscan, T350.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Cerbera SP6
Price: £656.65
ex VAT £571.00
LA-CO RUST BUSTER: PART NO MS012
Rust Buster quickly loosens rusted bolts, screws, shafts, piping etc. Contains no acid, alkali or other harmful ingredients. Safe for clothes, metals and friction-type surfaces. Comes in a 4fl.oz. container with a 7" telescopic flexible spout for ease of application.
Price: £2.59
ex VAT £2.25
Please contact us for further information concerning availabilty or suitable application.
MILLERS RED RUBBER GREASE: PART NO MS011
This is a vegetable based grease that is ideal for use when assembling components that are in contact with rubber. The formulation of the product prevents the rubber from swelling or hardening. Use to assemble brake and clutch components or on suspension rubbers. Suplied in a 500gm tub.
Price: £7.48
ex VAT £6.50
RED LINE SYNTHETIC GREASE: PART NO MS004
Synthetic high-performance extreme pressure grease provides high temperature and high load protection and low-temperature flow, and a very high drop point. Used for racing drive shafts and bearings. It is important to thoroughly clean out old grease to minimize the possibility of incompatibility. Supplied in 397g container.
Price: £17.19
ex VAT £14.95
DAMPER BUSH, PART NO C0092
Original damper bush for Bilstien shocks.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, Cerbera SP6
Price: £9.10
ex VAT £7.91
SUSPENSION BUSH, PART NO C0200
Long suspension bush, original equipment, fitted on front and rear suspension.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, Cerbera SP6
Price: £4.82
ex VAT £4.19
WHEEL CENTRE COVER AND BADGE, PART NO G0038
Estoril wheel centre cover and badge. Fits the original Griffith wheel. Very limited supply.
Fits: Griffith
Price: £28.75
ex VAT £25.00
Please contact us for further information concerning availabilty or suitable application.
TYRE VALVE CHROME, PART NO G0137
Tyre valve and sleeve; as fitted to Spider wheels. PLEASE NOTE THAT PRICE IS PER TYRE VALVE. Why not add a set of chrome caps; see item VALV1.
Fits: Cerbera V8, Tuscan, T350, Tamora, Cerbera SP6
Price: £3.28
ex VAT £2.85
SUSPENSION BUSH THRUST WASHER, PART NO C0192
Suspension bush thrust washer, original equipment as fitted to all vehicles from Griffith onwards using standard suspension bushes.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, Cerbera SP6
Price: £1.36
ex VAT £1.18
LOWER BALL JOINT PART NO C0164
Lower ball joint, high quality replacement.
Fits: Cerbera V8, Tuscan, T350, Tamora, Cerbera SP6
Price: £33.93
ex VAT £29.50
WHEEL BEARING KIT TVR PART NO. D0057K
Rear wheel bearing kit. Includes 2 bearings, 1 oil seal + left and right hand threaded nuts. Fits Griffith and Chimera models. PLEASE SPECIFY LEFT OR RIGHT WHEEL WHEN ORDERING
Price: £49.57
ex VAT £43.10
UPPER BALL JOINT SPACER PART NO C0948
Upper ball joint spacer 3mm two (one each side) used to replace original single 6mm spacer when using later type ball joint.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series
Price: £2.35
ex VAT £2.04
TRACK ROD AND AXIAL JOINT PART NO TVR009
Track rod with axial joint fits Griffith Chimaera Cerbera Tuscan Tamora with male thread fitting overall length 335 mm
Fits: Cerbera V8, Tuscan, Griffith, Chimaera, Tamora, Cerbera SP6
Price: £25.30
ex VAT £22.00
LOWER BALL JOINT GRIFFITH & CHIMAERA TVR PART NO. C0036
Lower ball joint for Griffith & Chimaera. No longer available from TVR
Price: £32.20
ex VAT £28.00
Please contact us for further information concerning availabilty or suitable application.
UPPER BALL JOINT GRIFFITH & CHIMAERA TVR PART NO. C0035
BASIC NITRON SUSPENSION KIT
Nitron Damper kit as fitted to all the best TVR's. Please contact us for pricing and availabilty.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series
Please contact us for further information concerning availabilty or suitable application.
