Engine
INJECTOR O RING, PART NO E4213
VALVE ADJUSTING SHIM KIT, PART NO TVR005
Valve adjusting shim kit for all Speed Six engines, contains 84 shims in a robust plastic partitioned box, in 0.05mm increments ranging from 1.85mm to 3.20mm, and laser etched with their size for ease of identification. This is an ideal starter kit for the serious DIY enthusiast or TVR workshop and whilst this kit does not cover the entire range the shims can be ground thinner to your required size using a local machine shop. There is a significant saving when buying this kit compared to buying individual shims.
Fits: Tuscan, T350, Tamora, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £82.19
ex VAT £69.95
PITON RING SET ROVER V8, PART NO E0200
HEAT BARRIER O RING, PART NO, E3542
CYLINDER HEAD GASKET 4.5 V8 PART NUMBER E1428
High quality composite cylinder head gasket for the Cerbera V8 4.5 litre B bank (left hand bank). This gasket is fully flood coated with silicone with additional beading for the coolant jacket. O ring seal for the high pressure oil feed is built in. This gasket is of higher standard than the original TVR head gasket
Fits: Cerbera V8
Price: £82.19
ex VAT £69.95
CYLINDER HEAD GASKET 4.5 V8 PART NUMBER E1427
High quality composite cylinder head gasket for the Cerbera V8 4.5 litre A bank (right hand bank). This gasket is fully flood coated with silicone with additional beading for the coolant jacket. O ring seal for the high pressure oil feed is built in. This gasket is of higher standard than the original TVR head gasket
Fits: Cerbera V8
Price: £82.19
ex VAT £69.95
CYLINDER HEAD GASKET 4.2 V8 PART NUMBER E1359
High quality composite cylinder head gasket for the Cerbera V8 4.2 litre B bank, (left hand bank). This gasket is fully flood coated with silicone with additional beading for the coolant jacket. O ring seal for the high pressure oil feed is built in. This gasket is of higher standard than the original TVR head gasket.
Fits: Cerbera V8
Price: £82.19
ex VAT £69.95
CYLINDER HEAD GASKET 4.2 V8 PART NUMBER E1048
High quality composite cylinder head gasket for the Cerbera V8 4.2 litre A bank (right hand bank). This gasket is fully flood coated with silicone with additional beading for the coolant jacket. O ring seal for the high pressure oil feed is built in. This gasket is of higher standard than the original TVR head gasket.
Fits: Cerbera V8
Price: £82.19
ex VAT £69.95
CYLINDER HEAD GASKET TVR PART NUMBER E6026
This is a high quality composite cylinder head gasket for the TVR Speed 6 engine. Fully silicone coated with added beading for all the coolant ways this gasket is of higher quality than the standard TVR gasket. Note during installation 2 O rings E2637 are required for the oil ways.
Fits: Tuscan, T350, Tamora, Cerbera SP6, Tuscan2, Sagaris
Price: £105.69
ex VAT £89.95
RV8 FRONT COVER AND OIL PUMP, PART NUMBER E0465
STAINLESS HEAT SHEILD, PART NO SHS1
ROVER V8 SUMP, PART NO SH1
Used Rover V8 sump straight fitment for 4 lit will need modifiying for long crank models, finding this component new is becoming increasingly more difficult, also a large saving over the new price, we also have contacts for many other TVR used parts email us and we will try to find it for you.
Fits: Griffith, Chimaera, Wedge, S - Series
Price: £82.25
ex VAT £70.00
Please contact us for further information concerning availabilty or suitable application.
HIGH OUTPUT IGNITION AMPLIFIER, PART NO TVR081
CRANK SHAFT BOLT, PART NO E0260
OIL COOLER BOBBIN, PART NO E3645
THROTTLE CABLE RHD PART NO E4244
PLENUM SPRING, PART NO TVR069A
VALVE STEM OIL SEAL: TVR PART NO. E2511
OIL LINE : TVR PART NO. E4251
This is the low pressure oil line that goes from the scavenge pump to the dry sump tank and is on the right hand side of the engine. Fits later Tuscan and Tuscan 2. Earlier cars used a smaller pipe (E3665) but the larger pipe can be fitted by the use of adapter E3700 which fits onto the dry sump tank. PLEASE CHECK CAREFULLY BEFORE ORDERING THIS ITEM OR IF UNCERTAIN CONTACT US.
Fits: Tuscan, Tuscan2
Price: £66.19
ex VAT £56.33
CAM SPOCKET BOLT, PART NO E2233
INTAKE HOSE KIT, PART NO TVR103
Complete set of 8 air intake tubes to fit 4.5 cerbera only, manufactured from high quality silicone, complete with stainless clips.
Fits: Cerbera V8
Price: £446.50
ex VAT £380.00
Please contact us for further information concerning availabilty or suitable application.
SUMP GASKET, PART NO TVR102
BREATHER COVER, PART NO TVR101
COOLING PIPE O RING, PART NO E1266
THROTTLE BODY SPRING, PART NO E6464
OIL COOLER KIT, PART NO OC1
Complete oil cooler kit, complete with remote filter for easy oil changes, for Griffith and Chimaera.
Please contact us for further information concerning availabilty or suitable application.
VALVE AJUSTING SHIM, PART NO E6028.
Valve clearance adjusting shim for all Speed Six engines, contact us for your requirements.
Fits: Tuscan, T350, Tamora, Cerbera SP6, Tuscan2, Sagaris
Price: £2.71
ex VAT £2.31
Please contact us for further information concerning availabilty or suitable application.
VALVE AJUSTING SHIM, PART NO E1119
Valve clearance adjusting shim for all AJP V8's, contact us for your requirements.
Fits: Cerbera V8
Price: £3.58
ex VAT £3.05
Please contact us for further information concerning availabilty or suitable application.
BREATHER FOAM FILTER, PART NO, TVR057
ROCKER COVER FLAME TRAP, PART NO TVR056
OIL TANK FILTER: TVR PART NO. E1169
OIL TANK GASKET, SPEED SIX : TVR PART NO. E3647
CAM COVER O RING, PART NO E6033
VERNIER TIMING SET, PART NO E0236
CRANK BOLT WASHER, PART NO E0451
CRANK PULLEY BOLT, PART NO E0260.
AIR INTAKE TUBE, PART NO E0060
OIL FILTER FOR PRE SERPENTINE, PART NO, E0062
ENGINE MOUNT CRADLE GRIFFITH AND CHIMAERA, METZLER MOUNTS: PART NO. TVR050
This cradle is designed to increase the life of your engine mounts bY fully encasing the rubber of the mount and therefore improving the distribution of the torque effect of the engine through the bonded surface. MUST BE FITTED AS A PAIR AND ONLY SUITABLE FOR GRIFFITH AND CHIMAERA DUE TO SPACE REQUIRED TO FIT. FOR CARS WITH METZLER MOUNTS. PRICED PER PAIR
Price: £39.95
ex VAT £34.00
ENGINE MOUNT CRADLE GRIFFITH AND CHIMAERA, TVR MOUNTS: PART NO. TVR051
This cradle is designed to increase the life of your engine mounts by fully encasing the rubber of the mount and therefore improving the distribution of the torque effect of the engine through the bonded surface. MUST BE FITTED AS A PAIR AND ONLY SUITABLE FOR GRIFFITH AND CHIMAERA DUE TO SPACE REQUIRED TO FIT. FOR CARS WITH TVR MOUNTS. PRICED PER PAIR
Price: £57.58
ex VAT £49.00
OIL PRESSURE RELIEF SPRING: PART NO. E2576
THERMOSTAT GASKET, UPGRADED: PART NO. E0195U
ROCKER LEFTHAND : TVR PART NO. E0278
Lefthand rocker to fit Rover V8 engine. One left and one right hand rocker for each cylinder.
Fits: Griffith, Chimaera, Tasmin, S - Series
Price: £19.04
ex VAT £16.20
Please contact us for further information concerning availabilty or suitable application.
ROCKER RIGHTHAND : TVR PART NO. E0277
Righthand rocker to fit Rover V8 engine. One left and one right hand rocker required for for each cylinder.
Fits: Griffith, Chimaera, Tasmin, S - Series
Price: £19.04
ex VAT £16.20
Please contact us for further information concerning availabilty or suitable application.
THROTTLE CABLE REPAIR KIT, PART NO TVR049
LIGHTENED AJP V8 FLYWHEEL, PART NO RP024
Raceproved AJP V8 Superlight Steel billet flywheels have been developed to increase engine performance. Horse power which would normally be absorbed by a heavy standard cast iron flywheel is now freed-up, and goes straight to the wheels. Extensive dyno testing has proven acceleration gains of 10 bhp over standard. A 34% weight reduction is achieved by using chromium molybendum steel instead of factory standard cast iron. Chromoly steel has fantastic tensile strength compared with iron, and therefore the flywheel is designed using much less material. Once machined, the flywheels are nitrided for durability, and to reduce wear from AP clutch butterfly spring contact. The starter ring gear is incorporated into the billet to give an elegant one-piece flywheel. The gear tooth profile of our flywheels is bespoke, and has been optimised for the Cerberas Tilton starter. This has been proven to improve many of the problems associated with the standard ring gear, and should enhance the lifespan of your starter motor. Our flywheels are made without compromise to the highest quality, giving your car a crisper throttle response and keen acceleration, whilst still retaining the smooth idle and superb driveability.
Fits: Cerbera V8
Price: £385.40
ex VAT £328.00
LIGHTENED SPEED SIX FLYWHEEL, PART NO RP023A
Raceproved Speed Six Superlight Steel billet flywheels have been developed to increase engine performance. Horse power which would normally be absorbed by a heavy standard cast iron flywheel is now freed-up, and goes straight to the wheels. Extensive dyno testing has proven acceleration gains of 14 bhp over standard. A 39% weight reduction is achieved by using chromium molybendum steel instead of factory standard cast iron. Chromoly steel has fantastic tensile strength compared with iron, and therefore the flywheel is designed using much less material. Once machined, the flywheels are nitrided for durability, and to reduce wear from AP clutch butterfly spring contact. The starter ring gear is incorporated into the billet to produce an elegant one-piece flywheel. The gear tooth profile of our flywheels is bespoke, and has been optimised for the Speed Six. Our flywheels are made without compromise to the highest quality, giving your car a crisper throttle response and keen acceleration, whilst still retaining the smooth idle and superb driveability.
Fits: Tuscan, T350, Tamora, Cerbera SP6, Tuscan2, Sagaris
Price: £410.08
ex VAT £349.00
SPEED SIX FLYWHEEL, PART NO RP022
Raceproved standard weight flywheel, manufactured from Chromium Molybendum steel instead of standard cast iron. The starter ring gear is incorporated into the billet to produce an elegant one-piece flywheel. The gear tooth profile of our flywheels is bespoke, and has been optimised for the Speed Six. Fits all Speed Six models.
Fits: Tuscan, T350, Tamora, Cerbera SP6, Tuscan2, Sagaris
Price: £398.33
ex VAT £339.00
OIL GAUGE PIPE: PART NO. E3623
WATER PUMP GASKET, SERPENTINE, PART NO E0471
ALLOY CERBERA AIR FILTER OIL BREATHER: PART NO. RT005
ALLOY CERBERA HEADER TANK: PART NO RT004
STAINLESS STEEL ROCKER COVER BADGE : PART NO. RCB001
Polished rocker cover badges laser cut from stainles steel sheet for Rover engined models. They are negative cut so that the name shows the colour of rocker covers that have been powder coated. A superb enhancement to the look of your engine, price is per badge. PLEASE SELECT FROM 4.0, 5.0 or TVR WHEN PLACING YOUR ORDER.
Fits: Griffith, Chimaera, Wedge, S - Series
Price: £10.58
ex VAT £9.00
THROTTLE CABLE: PART NO E2738
TEMPERATURE SENDER UNIT: PART NO M1275
THROTTLE CABLE REPAIR KIT, PART NO TVR047
THROTTLE CABLE REPAIR KIT, PART NO TVR046
OIL FILTER, PART NO E2117
DRIVE BELT, PRE SERPENTINE: PART NO E0120
30-LED WORKLIGHT: PART NO. MS033
SUMP DRAIN PLUG, PART NO TVR045
The sump plug on Rover V8s can be difficult to undo unless you have the right size spanner and the space to use it. The standard plug can also be damaged by sleeping policeman and other low obstacles due the hexangonal shape. The edge can catch and be moved. This magnetic plug plug uses a different design with a 10mm Allen recessed socket that makes removal easier. The circular profile reduces the risk of the plug being caught, moved and causing an oil leak. It also comes complete with its own inbuilt rubber sealing ring thus removing the need for a washer. The plug is also fitted with a magnetic tip to trap any iron or steel debris that might be contained in the oil. This debris can be removed from the plug during routine oil changes.
Fits: Griffith, Chimaera, S - Series
Price: £8.52
ex VAT £7.25
HT SILICONE COATING : PART NO. MS029
This silicone coating provides lasting protection for any hot surface up to 1500 F. It is ideal for use with our exhaust wrap (MS001)due to it's excellent sealing properties provividing extended protection from harsh abrasions, oil, grease and dirt. It can also be used on exhaust headers, pipes and engine blocks. Available in a 12oz. can in either black or aluminium. PLEASE STATE COLOUR REQUIRED ON YOUR ORDER.
Price: £13.59
ex VAT £11.57
MARINE CLEAN : PART NO. MS022
Marine Clean is an industrial strength cleaner and degreaser that is non-flammable and non- corrosive. It makes short work of the most stubborn oil and grease deposits. Dilute with hot water to remove oil, petrol deposits in old tanks and grease deposits. Great for cleaning the engine, removes mildew and staining from all surfaces. Has many cleaning uses around the home as well. Supplied in a 3.785 litre container.
Price: £17.04
ex VAT £14.50
Please contact us for further information concerning availabilty or suitable application.
LA-CO RUST BUSTER: PART NO MS012
OIL FILLER CAP, PART NO 025E018A
RED LINE FUEL SYSTEM CLEANER: PART NO MS005
RED LINE SYNTHETIC MOTOR OIL: PART NO MS006
PIPERCROSS PERFORMANCE AIR FILTER, PART NO PCE0046
A new range of performance air filters, manufactured by Pipercross, using multiple layers of patented open-cell polyurethane foam, whilst maintaining maximum engine protection. Fits early Griffith, later cars have the panel style filter.
Price: £34.85
ex VAT £29.66
Please contact us for further information concerning availabilty or suitable application.
PIPERCROSS PERFORMANCE AIR FILTER, PART NO PCE3657
A new range of performance air filters, manufactured by Pipercross, using multiple layers of patented open-cell polyurethane foam, whilst maintaining maximum engine protection, fits all Speed Six models, EXCEPT CERBERA.
Fits: Tuscan, T350, Tamora
Price: £32.90
ex VAT £28.00
Please contact us for further information concerning availabilty or suitable application.
PIPERCROSS PERFORMANCE AIR FILTER, PART NO PCE2503
A new range of performance air filters, manufactured by Pipercross, using multiple layers of patented open-cell polyurethane foam, whilst maintaining maximum engine protection.For late Griffith only using flat panel style filter.
Fits: Griffith
Price: £34.85
ex VAT £29.66
Please contact us for further information concerning availabilty or suitable application.
PIPERCROSS PERFORMANCE AIR FILTER, PART NO PCE2584
A new range of performance air filters, manufactured by Pipercross, using multiple layers of patented open-cell polyurethane foam, whilst maintaining maximum engine protection.
Fits: Cerbera V8
Price: £17.45
ex VAT £14.85
Please contact us for further information concerning availabilty or suitable application.
ENGINE MOUNTING, PART NO E2814
Engine mounting. Fits Cerbera V8 4.2 and 4.5; NOT Speed Six.
Fits: Cerbera V8
Price: £23.24
ex VAT £19.78
Please contact us for further information concerning availabilty or suitable application.
SERPENTINE BELT TENSIONER, PART NO P0136
VACUUM ADVANCE UNIT PART NO E0261
OIL FILTER, SPEED SIX, PART NO E6143
THERMOSTAT GASKET, PART NO E0195
AIR CONDITIONING DISCHARGE PAD, PART NO P0459
POWER STEERING AND ALTERNATOR BELT, PART NO E2121
ALTERNATOR BELT, PART NO E2943
AIR TEMPERATURE SENSOR, PART NO N0112
VALLEY GASKET END SEAL, PART NO E0154
Valley gasket end seal, fit's Rover V8 Griffith onwards, 2 required per car.
Price: £4.28
ex VAT £3.64
VALLEY INLET GASKET, PART NO E2084
FRONT CRANK SEAL, PART NO E0169
RECEIVER DRIER, PART NO. P0121
IGNITION COIL PACK, PART NO E6523
AIR CONDITIONING DRIVE BELT, PART NO E2141
AIR CONDITIONING BELT, PART NO E6503
AIR CONDITIONING IDLER PULLEY, PART NO E2520
SUMP PLUG, ROVER V8, PART NO 035E254A
NGK SPARK PLUG SET, PART NO E0152K
OIL PUMP GEAR SET PART NO TVR010
INTAKE TUBE BLADDER CLIP. TVR PART NO. E3476
INTAKE TUBE BLADDER CLIP. TVR PART NO. E3475
POWER STEERING HOSE TVR PART NO. H0279
OIL PRESSURE SENDER TVR PART NO. E6559
AIR FILTER TVR PART NO. E3657
CERBERA THROTTLE CABLE TVR PART NO. E2931
CERBERA AIR FILTER TVR PART NO. E2584
CHIMAERA / GRIFFITH AIR FILTER TVR PART NO. E0046U
LAMBDA SENSOR SPEED SIX TVR PART NO. M1344
Lambda Sensor. Fits Speed Six Cerbera and Mk. 1 Tuscan with 3 wire Lambda. For 4 wire sensors for Speed Six engines see M1444 and M1972
Fits: Tuscan, T350, Tamora, Cerbera SP6
Price: £145.68
ex VAT £123.98
Please contact us for further information concerning availabilty or suitable application.
THROTTLE CABLE LATE TYPE TUSCAN TVR PART NO. E3618
For early Tuscan, without bracket modification.
Fits: Tuscan
Price: £53.65
ex VAT £45.66
Please contact us for further information concerning availabilty or suitable application.